Blog

Water Heater Repair San Antonio Blog

10 Hot Water Heater Tips

Posted by on Aug 19, 2019 in Water Heater Repair San Antonio | 0 comments

Here is a list of our top ten ways to save money on operating ones water heater.  With a proper maintenance performed on a regular basis, and some easy to do water conservation practices, it is easy to save money on a household’s monthly water and energy expenses.

  1.  Lowering the water temperature on the water heater thermostat. The factory preset for most water heater’s is higher than what it needs to be. Having it set around 120 degree at the most should work well for most households.

2.  Consider installing a heat trap.  According to Water Heater Hub, “Using either a heat trap loop or heat trap nipple can reduce wasted heat by as much as 60 percent. That really adds up when the bills come in. In addition, many state and local ordinances now require heat traps.”

3.  Use insulation around ones hot water heater storage tank.  Especially if ones water heater is an older model, this can be an excellent way to keep more heat inside the water storage tank in the winter time.  Newcomb and Company have steps on how to add the insulation here.  Read our article on this topic here as well.

4.  Use more cold water in the home.  From washing clothes in the washing machine to taking showers, there are benefits to use cold water instead of hot water.  Here is an article that describes what they are.

5. Periodically drain the water in the water storage tank.  Sediment naturally forms within the water storage tank due to the chemical reaction process that takes place within.  As the sediment deposits build up, it will help lower the efficiency of the water heater.  A yearly task of draining some of the water from the storage tank will eliminate this sediment and increase efficiency once again.  We have information on doing this here.  There is a nice video on it here too.

6. Using a timer on the water heater is one way of saving money on energy when the water heater will not be used, like in the evening.  It’s easy enough for homeowners to install a water heater timer themselves. Here is a nice guide on different types: https://www.hot-water-heaters-reviews.com/electric-water-heater-timer.html

7. Inspect of leaky water faucets in the home, especially from hot water faucets.  According to WaterSmart, “Water leaks that cause damage may be more insidious than is initially obvious. A water line crack as small as 1/8 of an inch can leak as much as 250 gallons of water daily, and a leaky toilet flapper looses around 200 gallons each day. Even a faucet leaking as little as one drip per second can waste up to 3,000 gallons of water each year.”

8.  Replacing older appliances with those that are more energy efficient is a big help too!

9.  Adding insulation wraps to the hot water heater pipes leaving the water storage tank is important too.  This video show the process of installing them.  Don’t worry, it is super easy to do.

10.  Lastly, depending on the age of your current water heater, there comes a time when it will save money by having a new model installed in order to reap the rewards of saving money on energy expenses.  Don’t hesitate contacting us to discuss what your different options are.

Check out this infograpic from the US Department of Energy also:

energy-saver-101-water-heating-infographic

Why is the Lawn Always Wet?

Posted by on Jun 10, 2015 in Plumbing Repair San Antonio TX | 0 comments

If you discover that you have damp areas in your grass, do not think twice to speak to Plumbing Repair San Antonio TX in the near future.

Have you have actually experienced any of the following concerns in your lawn. Maybe you have discovered a scent that penetrates throughout an area of your lawn? Exist any areas of the lawn that appear to constantly have water cleared up in them? These are 2 indicators that either an underground water line or a sewage system line can be spilling water into the ground water.Plumbing Repair San Antonio TX

Now how and why does this take place? One reason can be root penetration. A sewage system line for a water line could be permeated our even burst by a tree root. It is astonishing how strong tree roots can be. Certainly, the tree roots do not expand extremely quickly however the consistent pressure on the plumbing can damage it triggering a pinhole leakage, or ultimately crush and burst the pipe entirely. When this takes place, the water from the plumbing or the waste water from the sewage system pipe leakages out into the lawn.

A 2nd explanation for this is a collapsed pipe. Simply with the weight of dirt on top of pipes, or in a certain location of high erosion which has actually put even more dirt on top of the pipes, overtime, the pipes will at some point break down. One could likewise have troubles with reduced water pressure or a sewage system obstruction when a broken down pipe takes place. Despite the fact that we to most likely consider our house’s plumbing simply belonging of the internal structure of the residence, one should remember the capacity for leakages outside the house too.

Don’t hesitate to contact us with any plumbing or water heater repair San Antonio issue you might be having.

Troubleshooting Water Heaters

Posted by on Jun 10, 2015 in Gas Water Heater Repair San Antonio, Water Heater Repair San Antonio | 0 comments

Hot water heaters are one of a house’s most diligently operating devices. Day or evening, it’s producing completely heated water at any time when you would like it. When it unexpectedly is no longer working effectively, many of us often tend to worry.

Thankfully a nonfunctioning water heater does not constantly imply a pricey repair work. Prior to making an emergency call to Water Heater Repair San Antonio, we recommend examining the trouble yourself first.

San Antonio Water Heater Repair Troubleshooting

Check the Pilot Light

For a gas water heater, eliminate the small panel on the bottom of the appliance and look to notice if the pilot light is ignited.
Spark it with a match or lighter to re-ignite it. If it remains lit, the water heater ought to kick-in and begin performing correctly.
If the pilot burner on the water heater does not remain ignited, you might require to change the thermocouple or have the burner cleaned.

Replace the ThermocoupleSan Antonio Water Heater Repair

It seems like a extremely technological title, however it’s in fact a basic gadget that you can change on your water heater.

Check the owner’s guide. It ought to have directions for ways to get rid of and change the thermocouple.
Switch off the gas prior to taking out anything at all from the water heater.
Using the guidelines in your individual’s handbook, eliminate the thermocouple by separating it from both sides of the aviator line.
Change the thermocouple on the water heater with a brand-new one that is cut to length.
Turn on the gas and check for leakages, then re-light the pilot light.

Hit the Reset Button

If you have an electric water heater, find the reset button and push it till you notice a click.
If you do not notice a click, or it falls short to reboot the water heater, reset the breaker.
If a breaker reset does not suffice, you could have to change the thermostat.

Change the Thermostat

Shut down the power to the water heater, and turn off the breaker it is linked to. You do not wish to electrocute yourself!
Use the owner’s guide to find the thermostat wires, then separate them.
Eliminate the thermostat and have it checked by a home appliance dealership. If it is defective, change it.

Change the Heating Element

With the power still turned off, get rid of the gain access to panel on the water heater.
Loosen the terminal screws and pull the wires far from the heating element.
Get rid of each part of the element and have them checked by a device repair shop. If they are malfunctioning, change them.

Your water heater must be working in no time. If these actions fall short to repair your hot water heater, or if you do not feel relaxed doing them by yourself, call Hot Water Heater Repair San Antonio.

Water Heater Insulation

Posted by on Apr 6, 2015 in Gas Water Heater Repair San Antonio, Water Heater Repair San Antonio | 0 comments

Most property owners appreciate acquiring new techniques to help lessen heating costs in the winter time we understand at Water Heater Repair San Antonio. And, due to the fact ones water heater runs far more in the wintertime doing just that, we have collected some recommendations to pass along today on the best ways to save on energy costs.

Here is a simple method to inspect ones water heater’s need for insulation: put ones hand near to or on the exterior of the water heater’s storage tank. It is feels warm, insulating the tank is advised. This loss of heat in the winter months will add up. And then, in the summer season, it can add heat to the space that one will want to attempt to cool if the water heater is found on the inside of the house and not in a garage. Any heat that is felt is certainly heat getting sacrificed. If it is not warm at all that is an excellent indicator that the tank’s internal insulation is in respectable shape. Brand-new water heating systems are being made with a great quantity of internal insulation today. The R-value is found on the producer’s tag so one can see exactly what the number is. If it R-24 or higher, one will most likely not have to use an insulation blanket on the water heater.

San Antonio Water Heater Blankets

A water heater blanket or wrap helps reduce most of this heat loss. Initially contact your energy company, for quite a few have insulation kits at decreased expenses for house owners. These hot water heater blankets can be found in various sizes depending upon the gallon size of the storage tank. The greater the R-value, the more substantial the insulation is. It is recommended making use of one that is not less than an R-11.

The blankets are simple and easy to put on. They will have insulation tape to complete the joints of the blanket. The shinny or vinyl side will go on the exterior.

With gas water heaters, wrap it around, while not covering the top flue, and unwrapped over the controller at the bottom. Likewise, never cover the T&P valve lever, or the underside of tank for this will obstruct air from going into the tank. With electric water heaters, because there is no exhaust flue on the top, it can also be covered, however do not cover the heating-element access panels.

These water heater blankets will certainly last a long period of time. It could be used again when the water heater is updated, providing it’s the very same size to match the storage tank.

Water Heater Pipe Insulation

There’s 2 different kinds of pipe insulations that ought to be made use of for a water heater. All pipes positioned inside of six inches from the water heater exhaust flue, fiberglass insulation wrap ought to be made use of and ought to be connected with either high temperature aluminum tape or wire. Pipes beyond 6 inches can be covered in foam insulation sleeves.

The United States Department of Energy indicates that house owners insulate a minimum of six feet of the pipe entering and from the water heater. This can boost the temperature level at the faucets 2 to 4 degrees and help save cash on heating. We in addition advise wrapping both the cold and hot pipes too.

Energy Savings from San Antonio Water Heater Insulation

Insulating an ineffective water heater can certainly help minimize the expense of using that heater by 5 % to 10 %. Depending upon the design, that can preserve anywhere from $5 to $20 each year, meaning that a water heater blanket can be paid for in 1 to 4 years. Adding insulation may decrease standby heat losses by 25 % – 45 % and preserve around 4 % – 9 % in water heating expenses.

Water Heater Repair San Antonio Overview Video

Posted by on Mar 30, 2015 in Gas Water Heater Repair San Antonio, Plumbing Repair San Antonio TX, Tankless Water Heater Repair San Antonio, Water Heater Repair San Antonio, Water Heater Replacement San Antonio | 0 comments

We have actually doing water heater repairs right here in San Antonio for numerous years. We are a family-owned and ran company, and happy that client care is of the greatest significance to us. Our objective is to offer quick, inexpensive and dependable water heater repair services, particularly in emergency situation circumstances!

We understand that inexpensive repair costs are generally a choosing element for lots of our clients and we aim to provide the finest priced repair and water heater maintenance services as we can. With prevention actions and being proactive with upkeep will assist in reducing the requirement for numerous repairs and extend the life of ones water heater. Delaying plumbing issues can be an aggravating, dangerous, and expensive mistake. We have great deals of suggestions and concepts to assist avoid a water heater replacement in our blog.

We are competent in all kinds of Water Heater Installations and Replacements, consisting of gas water heaters, electric water heaters, tankless water heaters, and solar water heaters.

Our Other Plumbing Repair San Antonio Services

We are likewise available to help with basic plumbing services and repairs, from leaking faucets, drain cleaning, toilet repairs, even slab leak repairs. There are few plumbing repair scenarios we have actually not experienced while being in business, assisting our San Antonio next-door neighbors.

Water Heater Maintenance

Water heaters produced today have actually come a long way in regards to their innovation and need little upkeep. Nevertheless, with any home appliance, there are some routine upkeep jobs that ought to be carried out to assist prevent typical issues.

The water in the tank ought to be drained a minimum of when a year to obtain rid of any sediment that gathers which can trigger rust and reduction effectiveness. Doing this will likewise enable the system to run even more quietly. If you have ever had popping or banging noises from from the water heater tank, it is an indication that it requires to have the sediment cleared.

Test the pressure-relief valve by raising the valve’s handle and letting it snap back. This ought to release a burst of water into the overflow drain. If it does not, a brand-new valve ought to be installed. Following this test, watch out for little leakages from the valve. This is a great annual test likewise.

Preserve 2 feet of unused area around the water heater and keep the location beneath clean and well swept.

Every 3 to 5 years, analyze the sacrificial anode rod inside the tank to inspect to see exactly how rapidly they are weakening. If even more than 6 inches of the core steel wire is exposed it would be best to change the rod.

Insulate older systems with a fiberglass coat (typically available at hardware shops) to enhance efficiency, being cautious to prevent contact with the flue. More recent systems are currently optimized for peak energy efficiency, however still utilize pipe insulation around all pipes, not only the hot water pipes.

If one is preparing on being far from home for a prolonged duration of time, adjust the thermostat setting on gas heaters to a “Vacation” setting, which preserves the pilot burner without heating the water.

When Is a San Antonio Water Heater Replacement Needed?

Just like many any house appliance, a water heater will break down it seems at the most inconvenient time. Though, there are most constantly indications that ones heater is nearing completion of its life period.

Traditional storage-tank water heaters nearing completion of there 10 to 13-year life period, replacement is most likely unavoidable. New designs depend on 20 % more effective and can conserve approximately $700 in energy expenses over the life of the system. Nevertheless, if your water heater is just a couple of years of ages, more frequently than not, it can be fixed and serviced without requiring a replacement water heater.

If you are searching for a truthful, dependable, courteous and inexpensive plumbing professional, look no additional. By choosing Water Heater Repair San Antonio Texas for your domestic and industrial plumbing services, you will get the extremely finest service possible.

Repairing a Noisy San Antonio Water Heater

Posted by on Mar 14, 2015 in Gas Water Heater Repair San Antonio, Water Heater Repair San Antonio | 0 comments

We are frequently being consulted to check out at water heater. Popping and knocking noises can be caused by problems with the water heater, but it’s likewise an aggravation. We are going to explore the most typical reason your water heater may possibly begin creating noise and what you can possibly do to calm it down! Prior to consulting a San Antonio professional, have a look at one of the most typical water heater issues and remedies.

The most possible reason a water heater will make noise

Again, if the sound is an indicator of an issue with the heater that issue is more than likely sediment build up. The sediment originates from the water in the storage tank. It is primarily composed of calcium and magnesium debris and is primarily an issue in residences which may have hard water.

If the sediment starts to accumulate at the bottom of the storage tank, it traps a little part of hot water below it. This triggers the hot water to boil as the tank operates. The sounds noticed are the bubbles popping through the sediment.

Furthermore, the sediment itself could be the reason for the sounds. The sediment sits at the bottom of the tank and can get burnt up creating unusual sounds. And sometimes, the sediment will get carried up to the top of the tank and breaks off creating sounds as it plunges back down, bumping the sides on its way.

How to avoid a water heater from producing noise

If sediment build-up is what’s creating the sounds, the heater should be examined. Hot Water Heater Repair San Antonio TX can accomplish this and provide the tank a flush or advise a different remedy.

You can also stop sediment build-up by having expert routine maintenance carried out on the storage tank approximately annually. This technique involves flushing the tank of any sediment.

An additional excellent solution is to add a water softener in your San Antonio residence. Water softeners eliminate minerals from the water prior to it entering the water heater, dramatically minimizing sediment build up.

To learn more about other probable water heater problems and remedies provide Water Heater Repair San Antonio Texas a phone call!

Water Heater Venting Options

Posted by on May 13, 2014 in Water Heater Repair San Antonio | 0 comments

The following ideas about correct water heater venting from us here are shared in order for San Antonio house owners to have a basic understanding of exactly how the various types of venting work. They are not meant to be how-to directions for homeowners to perform themselves. The training and licensing of an expert plumbing repair service specialist is extremely vital.

In terms of venting, water heaters are usually vented in two ways; direct vent water heaters and power vent water heaters. So what’s the leading difference in between the 2 styles of water heaters? A direct vent water heater vents the combustion gases created from the water heater’s burner directly to the environment, while a power vent water heater eliminates them with the aid of a powered venting fan.

This video gives some tasks to perform to help see if your water heater is currently properly vented:

Direct Vent San Antonio Water Heaters

In a direct vent water heater, the heat produced from the combustion procedure is used to warm the water. The exhaust gases are then moved to the beyond the house via the exhaust pipe or chimney.

With direct venting, it operates with the idea that heated air is lighter than cool air and will rise naturally due to the difference in buoyancy between the cold and hot air. This is a good easy system that works well when the exhaust gases can be vented vertically. No additional power is required, and in turn the total hot water heating costs are lower.

The following video explains in more detail the details of a direct vent system:

Power Vent San Antonio Water Heaters

Power vent water heaters uses a fan or blower to assist in the removal of exhaust gases from the hot water heater. For locations that do not have access to a vertical vent or chimney, power vent water heater could be the best selection. With using a fan or blower, exhaust gases can be pressed with horizontal exhaust vent pipes.

The main advantage of a power vent system water heater then is the capability to locate the water heater far from a chimney. Or if there is no chimney available, to save cash by horizontally venting it to the outside through economical venting pipe rather.

The downsides of power vent water heaters against a direct vent heater are that power vent heaters will cost more at first due to the extra equipment (fan/blower) required for the install. Also, one will likewise should run a power line to the fan. This too, will contribute to the expense.

Another drawback is that the blower part of the water heater will need electrical power to operate. This will increase the hot water heating costs throughout it’s life time, though not that significantly.

And lastly, the blower noise can be heard operating when the hot water heater is running. While it’s most likely just a minor issue, it’s something that should be seriously considered. Appropriate installation can assist to eliminate, or at the minimum decrease most of this.

Though there are some differences between the two types, it really depends on ones specific situation, in regards to the location it is to be installed, and the ability to create a vent path to the outside of the home.  San Antonio  Water Heater Repair recommends taking a look at the ENERGY STAR info right here too in terms of the various energy efficiency ratings for the different types of sorts of heaters.

How to Prevent Water Heater Repairs

Posted by on Apr 1, 2014 in Water Heater Repair San Antonio, Water Heater Replacement San Antonio | 0 comments

Most people don’t ever think about the condition of their water heater we know. Rightfully so, as long as it is functioning smoothly. However, a little water heater upkeep can go a long way toward decreasing the number and frequency of repairs, and really assists to extend the life of the heater, staying clear of very early replacement. Find out how maintaining your water heater can impact its life-span and provide you less stunning moments of cold water.

A Healthy San Antonio Water HeaterWater Heater Repair San Antonio

While it is difficult to figure out precisely how long a water heater ought to last, a properly serviced, quality water heater can last 8 to 10 years. Obviously, lots of elements will impact the life-span, including electrical power abnormalities, the quality of the water heater, and the mineral density in the water. Routine water heater upkeep can likewise minimize electric bills by having it work more efficiently

Among things that destroys a water heater are mineral deposits. A lot of money is invested replacing heating elements and entire tanks, when some service periodically would help to prevent this expense from occurring. A healthy water heater is one that is insulated, clean, and without electrical wiring problems.

Problems with ones water heater normally end up being self-evident: A hot water faucet fails to bring hot water, you see dripping or puddles near the water heater, or the tank sends out unusual gurgling or popping sounds. These are a couple of warning indications telling you when your hot water heater requires changing.

It would be nice to know prior to your water heater springs a leak and causes an inconvenience or even worse yet damage to your home. If you identify you have a few of the early caution signs you will have time to assess your options of sizes and models and pick a certified installer instead of hurrying to discover a replacement water heater on a Friday afternoon or even worse on a weekend.

Below are some indicators that you could be prepared for a brand-new hot water heater

Age: On average, your gas hot water heater ought to last anywhere between 8 to 12 years, while an electric version will last a bit longer at 10 to 15 years.
Stained Water: When you utilize your hot water tap, does the water look a bit tinted? If so, there could be rust in your water heater, which is a possible indication your hot water heater is showing signs of wear and might start to leak.
Banging or Popping: When there is a accumulation of hard water sediment inside the water heater,it could could sound like explosions. These noises are caused by the difference in water temperature inside the tank as incoming cold water mixes with the heated water of the tank.
Moisture: Look around the base of the water heater for dampness, for this might be a sign of a sluggish or intermittent leak.
Cold Water: An unforeseen cold shower is not only bad way to start your day, but of a hot water heater that has to be taken a look at.
Significant Water Leaks: It’s time to call us now.

Removing Sediment in Your San Antonio Water Heater

Posted by on Dec 13, 2013 in Water Heater Repair San Antonio | 0 comments

If you have an issue with sediment, you’re probably currently familiar with it. Gas fired water heaters in particular frequently indicate that there is a sediment issue with rumbling sounds each time the tank cycles, while still keeping great water temperature. Fortunately, sediment in your hot water tank can easily be eliminated, preserving the functionality of your heater.

Water Heater Repair San Antonio

Water heater (Photo credit: km6xo)

If you have a gas water heater, turn the control to pilot. If you have an electric design, you ought to turn off the power at the panel. Next shut down the water above the heater so no brand-new water can get in the tank. Then connect a hose to the drain valve. The various other end of the hose should preferably go to a floor drain, although a bucket can also be made use of.

Open the drain valve to get rid of all the water from the tank. Most of the sediment needs to be eliminated by this easy act. Keep the drain valve open, but switch on the water as well, permitting some to get in the tank. Turn off the water after a couple of moments. Repeat this several times to coax as much sediment out with the water.

As a last procedure, close the drain and fill the tank a minimum of half full. Then you can drain it for a final time to get rid of any last remains of sediment. To avoid additional typical sediment issues, you can set up a sediment filter for your tank if your issue is mainly with sand. A sand filter need to be set up on the cold trunk line.

Often sediment can likewise congest up the drain valve itself. Preferably you ought to have the ability to wash the valve out under high pressure, but occasionally the valve should be replaced after a cleaning. You can achieve this job while the tank is still full, simply switch off the gas or power and await the water in the tank to cool. You must likewise not make use of any water in your house will finishing the replacement.

To eliminate the drain valve, merely utilize a large groove joint pair of pliers to turn off the old valve. Then set up a replacement valve by turning it in clockwise. Make certain to utilize pipe thread sealing tape or pipe joint substance on the threads to guarantee that the connection will prove out.

If you are planning to remove the drain valve, you could consider prior to setting up the replacement valve providing your tank a last flush. This is finest done if you have a floor drain that will rapidly drain the water and sediment.

Lots of people mistakenly think that a sediment filled tank or a leaky drain valve is cause to replace the entire hot water heater. By these simple upkeep steps, many property owners should be able to deal with any troubles on their own. Naturally, if you encounter various other issues while completing this repair, call a plumbing technician who will have the ability to easily attend to the problem.

Water Heater Repair San Antonio invites you to read more from us:

San Antonio Tankless Water Heater Repair Tips

Water Heater Replacement San Antonio

Enhanced by Zemanta

San Antonio Thanksgiving Energy Conservation Tips

Posted by on Nov 21, 2013 in Plumbing Repair San Antonio TX, Water Heater Repair San Antonio | 0 comments

We will not bore you with the common trite opening to a Thanksgiving holiday article … Water Heater Repair San Antonio truly just wants to share this infographic on saving energy this Thanksgiving weekend.

There are great deals of means to minimize energy used in the kitchen while preparing your meal that are added right here. Likewise, with all the heat produced from the kitchen and the extra body heat in the house, one can easily turn the thermostat down as well!

Water Heater Repair San Antonio

Now back to exactly how we opened the post … yes Water Heater Repair San Antonio enjoys Thanksgiving and are very thankful for many things. We didn’t wish to suggest we are not focused on the spirit of the holiday. It most definitely a time to reflect on all the blessings we have and can provide others! Enjoy!

You can also view this infographic at http://hotwaterheatermedic.com/thanksgiving-energy-saving-tips/ or http://visual.ly/thanksgiving-energy-saving-tips

How to Clean Your Washing Machine Drain

Posted by on Nov 7, 2013 in San Antonio Drain Cleaning | 0 comments

A stopped up washing machine drain can bring about a myriad of troubles for a homeowner. Not only can an obstructed drain possibly mean inefficient draining of water, it can also progressively result in overflow. Cleansing a washing machine drain is essentially an easy procedure, and in the end, will produce remarkable operation from your device.

Prior to starting a task with electrical home appliances, you must disconnect them to avoid accidental shock.

Clearing Obstructions From A Washing Machine Drain Is Simple

The drainage pipe is a large, versatile pipe found on the back of the cleaning machine. It is connected with four screws and a plate. First, eliminate the screws from the plate with a screwdriver, and detach the pipe from the cleaning machine. It is recommended to hold the pipe over a bucket to clear out any water that stays in the drain.

Separate the washing equipment drain hose from the drain pipe. The curved end of the hose is situated on the top of the pipe, and is generally held by a piece of plastic tie or wire. Making use of wire cutters or scissors, cut the wire or tie to release the drain hose.

Next, place a plumber’s snake into the drain pipe of the washing machine. Continue to advance it forward till you meet with resistance. When this happens, tighten the wing nut on the front of the plumber’s snake, and twist the rotation knob on the backside of it. This will assist to break up any clogs. Keep turning the snake. Repeat this same procedure until you no long feel resistence. This indicates that the drain is clear. Gradually pull the plumbing snake out of completion of the drain pipe. If there was an obstruction in the drain, an item or mass will come out with the snake.

The drainage pipe can be changed by reinsertion of the plate and screws. To get rid of any remnants of debris, run a cycle without any garments with your washing machine.

Natural Cleaners Can Also Clear Out Washing Machine Drains

For small develop and little obstructions, there are non-caustic remedies that are perfect for cleaning washing machine drains. To utilize this homemade recipe, drain all of the water out of your cleaning device. Pour one cup of baking soda into the drain of your device. Then, put 2 cups of boiling water into the drain. Allow 10 minutes for the blend to process. Next, add an extra cup of baking soda straight followed by one cup of vinegar. Making use of a rubber stopper, plug the drain. The response of the active ingredients must remove any unwanted material, and dissolve any little obstructions. Pour a minimum of a half a gallon of boiling water after 10 minutes to purge the continuing to be rubble through the plumbing system.

For a more relentless obstruction, a more powerful solution will need to be made use of. For this blend, you will need washing soda. This can be discovered in the laundry cleaning agent section of the supermarket. Pour one cup of the washing soda down the drain. Let this sit in the drain for a number of hours. Then, put one cup of baking soda and one-fourth cup of salt into the drain. These components can sit in the drain as little as one hour, and as long as overnight. Pour a compound of two cups of white vinegar and two cups of water slowly down the drain, waiting until the foaming subsides. Lastly, splash the mixture with hot water.

Here is another video that shows a similar process but with using bleach:

For more in depth information, check out PROBLEMS COMMON TO ALL WASHER BRANDS from Appliance Repair.

If you at any time feel uncomfortable cleaning out your washing machine drain, provide San Antonio Drain Cleaning a call for assistance.

How to Fix a Leaking San Antonio Water Heater

Posted by on Nov 7, 2013 in Gas Water Heater Repair San Antonio, Water Heater Repair San Antonio | 0 comments

If your hot water heating unit is dripping water, there could be reason for concern, or maybe a simple fix suggests Water Heater Repair San Antonio.

Right here are some guidelines for taking a cautious take a look at your hot water heating unit and diagnosing the issue.  This write-up will certainly cover both gas and electric water heating units, supplying unique notes if different diagnoses are needed for each specific kind.

Diagnosing and Fixing Water Heater Leaks

Start by evaluating the water pipes leading into the heating unit, the flexible connectors and the shut-off valve. Of course, with an electric heater, you wish to turn off all power supply to the heater if water is dripping around it, removing the opportunity of electric shock.

Now, examine the T&P valve, which could be discovered about 3/4 of the way up the heater on the side. Lift it gently and afterwards reduced it to a shut position. Do not snap this lever shut. Oftentimes, this will solve a leak. Otherwise, you most likely need a brand-new T&P valve. Be certain to check the pressure and temperature markings on the shutoff when you go to buy a new one.

With an electric heater, the thermostat may not be flat against the storage tank, triggering the storage tank to overheat and release steam/water with the T&P valve. You can open the covers of your heater and check to see if the thermostat is flat on the tank. The thermostat might likewise be past repair, which will certainly additionally lead to an overheating heating unit that will produce condensation and water leakage.

You must additionally inspect the drainpipe shutoff, which will have threads on it and could be affixed to a hose. If it cracks a bit, connect a brief hose to it and have it drain into a container. Many drain shutoffs are not leaky; it is extremely unusual to have faulty drainpipe shutoff, unless it is really aged and needs changing.

Is water seeping near the bottom?
Check the flue at the bottom of the heater. An incorrect vent positioning can create water to drip down the flue.

Now, if you see various other leaks from the side or the top of the heater, you could possibly have a severe trouble. Your tank could be rusted out and require a total replacement.
One brilliant step to take would certainly be to inspect the age of the heater by taking a picture of the identification number and various other info and browsing the web to uncover its age. Some heating systems could rust in as little as 7 years, although most last 10-15 years. If you have not carried out routine maintenance on the heating unit, like clearing the water, possible replacement of anode rods) then your heating unit could not make it to increase figures in age.

If you do suspect extreme corrosion, you ought to obtain a professional viewpoint before you get a brand-new hot water heating system, or the tank fractures, developing a big trouble in your basement or venue wardrobe. Water that leaks from the leading of the storage tank is particularly threatening.

If you are afraid a leak when you start to utilize your new gas heating system, do not panic. The first time a gas heating system starts up, it will produce condensation. That is the reason for the dripping sound, and possibly a very small pool. As the heater heats up, this trouble vanishes. Condensation could also arise from a massive water draw and/or an extremely chilly inlet water temperature. This condensation will certainly look after itself also, as the water gets warmer. If, however, the heating system has some age, if there is a leakage and the vent pipe is dry, after that the storage tank is rusted out.